Ignition coil / filter

Product overview by image number (exploded view)

1. IGNITION COIL
2. LID / TOP
3. Phillips head cylinder head screw
4. SPRING RING
5. Phillips head cylinder head screw
6. RUBBER SEAL
7. HOUSING / BOTTOM
8. Phillips head cylinder head screw
9. CYLINDER HEAD SCREW M5X40 DIN 84 8.8 A2P
10. SPRING RING
11. Phillips head cylinder head screw
12. HEXAGON NUT M5 ISO 4032
13. MANAGEMENT
14. MANAGEMENT
15. MANAGEMENT
16. MANAGEMENT
17. CABLE TIES 4.6X146MM SST3S
18. IGNITION SWITCH
19. HEXAGON SCREW M6X20 ISO 4017
20. WASHER A d6.4/12X1.6MM DIN 125
21. HEXAGON NUT M6 ISO 4032
21. HEXAGON NUT M6 ISO 4032
22. HEXAGON SCREW M5X12 ISO 4017
23. GROUND TAPE 200MM
24. HEXAGON SCREW M6X16 ISO 4017
25. Wide band hose clamp NORMA ST A3P
26. PROTECTIVE CAP
26. PROTECTIVE CAP
27. Noise filter
27. CAPACITOR
28. Noise suppression cap
29. RUBBER GROMMET
30. HEXAGON NUT M4 ISO 4032
31. SPRING RING
32. Series resistor 1.8 ohms
32. RESISTANCE 1.4 OHM
33. Phillips head cylinder head screw
34. Phillips head cylinder head screw
18. TRANSISTOR 2N1012 NPN 40V 5A 150W / TO-5
18A. IGNITION SWITCH WITHOUT CONNECTIONS

Do you need help?

Check the exploded view to see which spare part you need.

You can find the corresponding number in the product overview.

If you're unsure or can't find the right spare part, don't hesitate to contact us!
('Contact' > 'Contact us')

The spare parts come from the former stocks of the Swiss Army.
Most of the parts are original Mercedes or Bosch items that were manufactured for the Puch 230 GE.